There are several types of Gorilla Glue products that you can use on metal surfaces. The drying times of each will vary. However, you can do a few things to speed up the drying process.
Gorilla Glue can take between ten seconds to two hours to dry on metal. Gorilla superglue products dry faster on metal than their standard glues. Most of these also require clamping for at least two hours and usually fully harden in 24 hours.
This article will outline the best Gorilla glues for metal surfaces. It will also provide you with their drying times. However, if these aren’t fast enough, I’ll show you a few ways to speed up the drying time.
How to Make Gorilla Glue Dry Faster on Metal Surfaces
There are several methods you can use to make Gorilla Glue dry faster. However, there are a few steps you’ll need to follow for each technique. These will help to ensure maximum effectiveness.
Apply Heat
Applying heat is one of the best ways to speed up drying. Regardless of the type of glue you use, you’ll need to prepare the surfaces by cleaning them. A clean, dry cloth usually helps to remove dust.
Once you’ve cleaned both surfaces, sand them. This may seem counterproductive after the initial step of removing dust. However, metal is smooth. Sanding roughens the surfaces allowing the glue to adhere better. After doing this, clean them with a damp cloth, and allow them to dry.
Apply the glue to one of the surfaces, then use pressure to join both together. You can use a portable heater on the item. A light application is all you need, as overheating may affect the glue’s adherence or damage the item.
Add Water
Before adding water, you’ll need to estimate how much glue you’ll need for your project, then place it in a cup. The water you add should be warm and less than the amount of glue you’ve allotted. This video gives you tips on the best way to determine the amount of glue and water you need.
Stir the contents of the cup with a stick. The two won’t mix, as Gorilla Glue is waterproof. However, the water will initiate a chemical reaction. It’s the reason dampening the surface is usually recommended before application.
Remove the water from the cup and stir the glue again. Apply the glue and affix the surfaces together. This should reduce the glue’s drying time.
Use Vinegar and Baking Soda
This DIY solution is most effective on wooden surfaces but also works on metal. This video provides step-by-step instructions. It will show you how to speed up the drying process using these two ingredients.
Make a note of the number of drops of glue you need for your project. Use half of this amount of vinegar and add it to the adhesive.
Add a pinch of baking soda and mix the three substances. Add as much baking soda as you need until the mixture has a paste consistency.
You’ll need to apply it immediately and evenly to the surfaces you’re gluing. Then affix the surfaces to each other. This method should allow the glue to dry in less than an hour.
Best Types of Gorilla Glue Products for Metal
Several types of glues and adhesives under the Gorilla brand work well on metal. They include:
- Gorilla Glues
- Super Glues
- Epoxies
- Construction Adhesives
- Craft Glues
All have varying drying times. Some are also specifically designed for application on smaller surface areas. Let’s look at the top three products that work best on metal surfaces.
- Gorilla Glues: There are four types of Gorilla Glues. This includes the original product that gave the brand the reputation it has today. Products in this line require clamping for ten minutes or up to two hours. These glues usually take up to 24 hours to dry completely. Depending on the glue you use in this line, you can have a clear or white finish once dried.
- Super Glues: Gorilla’s Super Glues are fast-setting and take ten to 45 seconds to dry. They usually don’t require clamping. They also provide options to facilitate more precise applications. These are ideal for smaller surface areas.
- Epoxies: Gorilla epoxies are extremely durable and strong. The GorillaWeld, available from Amazon, is one of the brand’s best products for metal surfaces. It takes as little as ten minutes to set and is long-lasting.
Summing Up: Getting Your Projects Done Faster
If you’re working on a project and need to affix two surfaces together, you’ll want to use an effective product. Metal surfaces will require a special adhesive, and Gorilla Glue may be one of the best.
However, despite its effectiveness, you may want to ensure your surfaces dry quickly. The brand’s super glues are a great option. You can also use any of their other products for metal surfaces. If you want them to dry faster, use one of the methods above.
RELATED POSTS: